A serpentine kit is available. It includes a custom harmonic balancer and all the mounts and brackets needed to arrange accessories in a serpentine drive arrangement on a GM V8 small block engine for fitting into the Fiero, including a power steering pump and A/C compressor. Please contact us if you are interested.

Manual Flywheel $299

Manual Bell Housing Adaptor Aluminum $169 Steel $269

Thin profile harmonic balancer for small block chevy $206.95

Automatic Flexplate $199

Automatic Bell Housing Adaptor $199

We have engine bell housing adaptors and flywheels to mount GM / Chevrolet fuel injected or carbureted small block engine to the Fiero or other GM transaxles. The manual transmission bell housing adaptor is available in your choice of steel and aluminum material, both versions are identical in shape and mounting.

The automatic bellhousing adapters are only available in aluminum. The standard version requires cutting a small corner of the engine block to clear the transmission housing. The "rotated" version does not require any cutting of the engine block but it rotates the engine about 5 degrees forward.

We have parts for mounting either automatic and manual transaxles, both with a choice of the two piece and one piece rear main seal small block engines. The LT1 engine is supported, but the Corvette LS1 engine is not currently supported.

Our bellhousing adapter plates and flywheels use standard, easy to find starters, similar to the kind used in an '84 Nissan Maxima. The starter cross references with: 70's Nissan 200SX, '78-'83 Nissan 280Z and 80's 720 Pickups.

The clutch that works with the manual flywheels we offer are those that work with a '92 S10 with a 2.8L V6 engine with manual transmissions. The friction disk is 9.5" diameter and the pressure plate has a 10.55" bolt circle. This clutch is be available at many auto parts stores.

Oil Filter Relocating Kit with tight clearance adaptor fitting: $109 Buy in Web Store

Tight Clearance Adaptor Fitting $79 Buy in Web Store

Oil Hose Swivel Fitting, $5.99 Buy in Web Store

New Complete Kit
All the parts needed to relocate the oil filter, including the Street Dreams exclusive tight clearance adapter housing, all for $129. The separate tight clearance housing will remain available for those that already purchased a kit elsewhere.

Both Street Dreams automatic and manual bellhousing adaptors need an oil filter relocating kit, but this tight clearance adapter housing is only needed by those who are using an automatic transmission. Those that use the Automatic transmission adaptor find they need a tight clearance oil filter adaptor housing to be able to route hoses around the starter. This separate fitting still requires the rest of the parts that are included in a typical oil filter relocator kit.

The swivel oil fitting enables easy insertion and removal of an oil filter relocator kit's hoses, other kits on the market do not offer the swiveling feature on their included lines.

GM Small Block Alternator Relocator Kit Our Price: $99 Buy in Web Store

This allows another option in alternator location. This is good for Fiero V8 conversions as well as street rods where stock location causes space problems. This kit allows belt tension adjustment and an adjustable range of alternator locations.

GM Small Block Cradle Engine Mount Our Price $79 Product in Web Store

Rigid Transaxle Mounts Our Price $34.95 Product in Web Store

Longitudinal Engine Mount Our Price: $299 Product in Web Store

Differential Rotator Plate Our Price: $99 Product in Web Store

Differential Gasket Our Price: $7.99 Product in Web Store

The Cradle Engine Mount is a laser cut steel plate that bolts to the "front" face of the engine block, and it includes a mount point for the A/C compressor. This is designed to be bolted to a piece of angle iron (not included). That angle iron would either be welded directly to the engine cradle or with holes mountable to the Fiero's stock cradle rubber mount. Multiple hole patterns allow a choice in engine heights.

The Longitudinal Mount is predrilled to mount a GM 325 and 325 4L transaxle onto the Fiero's cradle. These transaxles can be found in older Toronado, El Dorado and Riviera cars. It is made from 5/16" thick steel.